How To Install Pat Files In Photoshop

View Original  10

How to install custom hatch patterns in AutoCAD

By:

Support

Issue:

This commodity describes how to install custom hatch patterns in AutoCAD using PAT files.

Causes:

Hatch configuration files are saved in PAT-files.

Solution:

Agenda of this solution:

• Where to save the PAT-files - Windows
• Where to save the PAT-files - macOS
• Loading a custom PAT-file
• Editing a custom PAT-file

Apply the following steps to install hatch patterns based on the unlike operating systems:

Where to save the PAT-files

Windows Os

Copy the custom PAT -files into the default Support folder (run across below) that AutoCAD uses to find hatch patterns. Added PAT-files will cause hatches to be listed under the User Defined or Custom hatch carte within AutoCAD.

• Windows 10:
  • C:\Users\<user name>\AppData\Roaming\Autodesk\AutoCAD <version>\Rxx.ten\<language>\Support

Notes:

• Rxx.x stands for a specific AutoCAD release version:
  • <Release version>:  R24.1: 2022; R24.0: 2022; R23.1: 2022; R23.0: 2022
• If you lot don't see the path to a higher place: The AppData and Awarding Information folders in the above paths are hidden folders
  • Come across How to turn on hidden files and folders on Windows.
• If there is no longer a PAT-file of an existing hatch used in a drawing, use the limited tool SUPERHATCH to try and bring in the custom hatch pattern (not available in AutoCAD LT).
• The default path is specified in the Support File Search Path listed under the Files tab in Options. Information technology is unremarkably the showtime one shown, pointing to the current user folder.

If the preference is to keep custom hatch patterns also as other customization in a different location, the binder(south) need to exist added to the applications search path.

To add a custom folder to the applications support file search paths

1. Click the Awarding bill of fare (the big "A" at the top left) Options.
2. In the Options dialog box switch to tab "Files" and select node "Support File Search Path".
3. Click "Add".
4. Click "Browse...".
5. In the "Browse for Folder"-dialog box, browse to and select the folder to add. Click OK.
6. In the Options dialog box, click OK.

macOS

1. On whatsoever cartoon, type theHATCH command.
2. Click the pull-down in the Hatch visor for Patterns and click Open Library.

3. Click the drop-down pointer and select Add Patterns.

4. Browse to the location of the custom .pat files, select them, and click Open up.

5. Custom hatch patterns files will automatically exist copied to the post-obit locations:

• AutoCAD for Mac 2022 and after: ~Home/Library/Application Back up/Autodesk/AutoCAD <version>/Rxx.x/roaming/@<linguistic communication>@/Back up/Hatch Patterns
• AutoCAD for Mac 2022 to 2015: ~Home/Library/Application Support/Autodesk/roaming/AutoCAD <version>/Rxx.x/<language>/Support

Notation: Rxx.x stands for a specific AutoCAD release version:

• <Release version>:  R24.1: 2022; R24.0: 2022; R23.1: 2022; R23.0: 2022

Loading a custom PAT-file

Follow these steps:

1. Set up organization variable HPDLGMODE to ane.
   1. Enter HPDLGMODE into the command line.
   2. Type 1 and printing Enter
2. Enter command _HATCH. The "Hatch and Gradient"-dialog pops upward.
3. In selection list "Blazon" select "Custom".

4. In field "Custom Pattern" click the 3 dots-symbol.
5. The dialog "Hatch Pattern Palette" pops up. Select in the left frame the specific PAT-file and in the right frame the specific hatch pattern. Click Ok.

Note: If yous don't see the PAT-file listed, ensure that the PAT-file is saved in one of the listed paths in the Support File Paths-node in tab "Files of the options. If it is still non listed, then the PAT-file is corrupted.

Editing PAT-files, using Notepad

You may edit the default PAT-files that are installed with AutoCAD by using Notepad and adding your custom hatch design data at the finish of the file. There are two files: acad.pat (British units) and acadiso.pat (metric units) (AutoCAD LT: acadlt.pat and acadltiso.pat), which are located as noted above. Although line spaces are non required betwixt hatch patterns pasted into the file, a blank line must be placed afterward the final hatch pattern definition in a PAT-file. If a blank line is not placed after the last hatch blueprint definition, the last hatch blueprint definition will not be accessible. Yous can add comments by preceding text with 2 semicolons ( ;; ).

Products:

AutoCAD for Mac; AutoCAD LT for Mac; AutoCAD Products;

Mail a question. Get an respond.

Get answers fast from Autodesk support staff and product experts in the forums.

Source: https://knowledge.autodesk.com/support/autocad/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-install-custom-hatch-patterns-in-AutoCAD.html

Posted by: martinezmareake.blogspot.com

Share this post